EnviZyme AQT

Available Sizes
  • 500 g
  • 10 kg
Avantages
  • Promotes faster degradation of organic matters
  • Decreases nutrient levels
  • Improves dissolved oxygen and the balance of algae growth
  • Utilizes organic matter
  • Provides good settle ability of suspended solids
  • Improves the water clarity in aquaculture systems
  • Reduces ammonia levels, nitrates, algae and sludge build up
  • Reduces the risk of infection and improves survival rates
  • Reduces stock losses due to toxic ammonia
  • Reduces or eliminates the time required to oxidize the pond bottoms between growing cycles
  • Assists in controlling H2S gases
Category:

Description

Increases water quality. EnviZyme AQT is a synergistic blend of microorganisms, enzyme catalysts and beta 1, 3 glucan, which are some of the key elements required for water balancing. EnviZyme AQT assists in maintaining water quality during the crop cycle by controlling algae, ammonia and nitrites, while reducing organic bottom wastes as well as controlling the phytoplankton bloom.

Advantages

  • Promotes faster degradation of organic matters
  • Decreases nutrient levels
  • Improves dissolved oxygen and the balance of algae growth
  • Utilizes organic matter
  • Provides good settle ability of suspended solids
  • Improves the water clarity in aquaculture systems
  • Reduces ammonia levels, nitrates, algae and sludge build up
  • Reduces the risk of infection and improves survival rates
  • Reduces stock losses due to toxic ammonia
  • Reduces or eliminates the time required to oxidize the pond bottoms between growing cycles
  • Assists in controlling H2S gases

Properties

Physical Aspect: Tan coloured, free flowing granular powder

Packaging: 10kg plastic pail, 500g paper bag

Stability: Maximum loss of 1 log per year

pH: 6.8 – 8.5

Product Density: 0.5 – 0.61 g/cm3

Moisture Content: Below 15%

Nutrient Content: Biological nutrients and stimulants

Bacterial Concentration: 3.5 x 10^9 CFU per gram

Usage Conditions: Refer to SDS

Application

EnviZyme AQT is applicable for fish and shrimp culture.

  • Dosage should be adjusted according to stocking density, phytoplankton density, water and pond bottom conditions
  • The initial dose can be adjusted according to the organic loads of the pond bottom. Up to 1000g in 3 consecutive days can be applied during the pond preparation.
  • For ponds with no aeration, the weekly dose should be divided by 7 and applied on a daily basis.

dosage of EnviZyme AQT

Optimum conditions for use

The bacteria in EnviZyme AQT perform within a pH range of between 6.0 and 9.0, with optimum activity near a pH of 7.0. Temperature affects the growth rate of the bacterial population and activity improves to a temperature between 37°C and 38°C (99°F to 100°F). No appreciable activity can be expected below 5°C (40°F) and above 40°C (104°F). For best results, the make-up water temperature range should be between 21°C and 31°C (70°F to 90°F)

Preparation

EnviZyme AQT can be added directly to the waste influent stream, pond, aerated basin or lagoon. For toxic wastes or short retention times, re-hydration for between 30 to 90 minutes prior to its addition to a waste system is recommended, using 9 litres of water per 500g of EnviZyme AQT.

 

Storage and handling

Store in a cool dry place at room temperature. The recommended storage temperature is within a range of 1°C and 23°C (34°F to 73°F). Avoid excessive inhalation. Avoid contact with eyes. Wash hands thoroughly with warm, soapy water after handling.

Additional information

Size

10kg, 500g

Type

Powder

Reviews

There are no reviews yet.

Be the first to review “EnviZyme AQT”